MBZ 300 N48G * SHEV control panel for smoke and heat extraction system drives with a total power consumption of 48 A
- Modular design in large housing to allow flexible adaptation to project-specific requirements
- Convenient extension by clicking on other modules in a control unit
- Can be extended by alarm groups, ventilation groups and alarm lines as required
- Depiction of complex smoke and heat extraction scenarios
- Simple service and installation thanks to status display directly on the module
- Configuration software simplifies commissioning and configuration
- Wind direction dependent activation possible (SHEV according to EN 12101-2)
- Safety and reliability confirmed by VdS certification
Application Areas
- Connecting possibilities for medium to large smoke and heat extraction solutions, including with complex demands
- For smoke and heat extraction system drives with a total power consumption of 48 A
- Control of electromotive 24 V drives for smoke and heat extraction in the event of a fire
- Control of a controlled natural ventilation
Technical data
MBZ 300 N48G | |
Dimensions | 600 x 800 x 250 mm |
Width | 600 mm |
Height | 800 mm |
Depth | 250 mm |
Material | Sheeting |
Colour | grey RAL 7035 |
IP rating | IP30 |
Service temperature | -5 - 40 °C |
Operating voltage | 230 V AC |
Power consumption (max.) | 960 W |
Connection cross-section / mains | 2.5 mm² |
Output voltage | 24 V DC +/-15% |
Residual ripple | 2 % |
Output current (max.) | 48 A |
Duty rating with maximum output current | 30 % |
Battery capacity | 38 Ah |
Alarm groups | 1 |
Vent groups | 6 Stk. |
Networking of several control units | connection with optional CAN Bus modules |
Signal outputs available | 1 status contact per CM/SM, 6 signal contacts per ERM for which parameters can be set |
Parameter setting of control units | via USB interface an PC software |
Standard conformity | EN 12101-10, ISO 21927-9 |
Approvals | VdS |
Downloads
LABELLING OBLIGATION: © Jürgen Pollak / GEZE GmbH
LABELLING OBLIGATION: © Jürgen Pollak / GEZE GmbH
LABELLING OBLIGATION: © Jürgen Pollak / GEZE GmbH
LABELLING OBLIGATION: © Jürgen Pollak / GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
LABELLING OBLIGATION: © GEZE GmbH
Variants & Accessories
* Notice about the products displayed
The products mentioned above may vary in form, type, characteristics and function (design, dimensions, availability, approvals, standards etc.) depending on the country. For questions please contact your GEZE contact person or send us an E-Mail .